Products
Products
Superabsorbent SlurryBoom™
These SlurryBooms™ are a higher performing alternative to traditional cellulose absorbent
products that are utilized for hazardous, non hazardous and low level radioactive waste disposal.
Our booms are made with superabsorbent media and a cellulose filler material are packaged in a closed nylon sock to ensure maximum polymer retention and absorbency. The sock can be cut to size and placed in drums, boxes intermodal and other transport containers for solidification of aqueous matter and condensation control.
Some great benefits of the SlurryBoom™ include:
- Speciality socks that absorb and retain >1.0 gallons of water per linear foot of sock
- Minimum expansion, reducing overall disposal costs
- Non-biodegradeable polymer (per 40 CFR 264.314 (e) ((ii))
- Freeze-thaw tested - will not release liquids after freezing and subsequent thawing
- Incinerable material
- Delivers superior absorbency while taking up less volume in waste containers
This is What i Need
WasteShield Tape
Make easy repairs to your WasteShield berm with this heavy-duty repair tape.
- Avoid downtime in the event of a puncture or tear
- Creates a leakproof, permanent bond
- Roll out and cut to the size needed
- 6"x50"
Drainet®
Drainet is a high-density biaxial drainage core makes this the ultimate separation mesh to be paired with your filter for dewatering that is also so strong it withstands the heaviest loads.
Use our Drainet Coils to create cylinders inside drums or bins for separation in the dewatering process.
- High-density biaxial drainage core
- Withstands heavy loads
- Creates perfection separation for dewatering
- Various sizes available including dumpster
ZipPack Tote
This self-standing tote is a UN-rated bag that's the only solution you'll need for containment of non-hazardous waste up to 3,000 lbs. Our ZipPack has a unique zipper top and wire insert allowing for easy set-up, also making it compact compared to other totes.
- Patent-Pending self-standing tote
- UN Rated
- Glued in 6 mil liner for ultimate leak protection
- UV-coated, weather resistant
- 3x3x3 - collapsible
This tote comes with either a single liner, or a dual liner for added protection.
This is What i NeedWasteShield® Stabilizer Mat
Our Stabilizer Mat is designed to be installed under your WasteShield spill berms on concrete or asphalt surfaces. This mat provides stability and helps to avoid punctures while still being flexible and durable.
- Easy to install
- Protects against heavy loads and sharp objects
- Flexible and durable
- Provides the ultimate support base for your system
- Comes in three sizes:
- Heavy Duty (HD)
- Standard Duty (SD)
- Light Duty (LD)
WasteShield® Protection Mat
This mat provides an extra layer of protection against heavy loads and sharp objects inside of your WasteShield berm, allowing for increased longevity.
- Easy to install
- Protects against heavy loads and sharp objects
- Flexible and durable
Poly Sheeting
Our heavy duty poly sheeting provides extra protection when you need it.Our polysheeting is provided in continuous rolls of strong low density polyethylene and is available in black.
- 6 mil. thick
- Black
- Extra heavy-duty coverall
Inlet Filters
Inlet Filters are designed to reduce surface water pollution and prevent clogging from construction stormwater runoff. These filters catch silt and sediment while allowing water to travel freely.
- Assists in water pollution control
- Made with high density yarns
- Available in regular and high flow
- Available with or without curbside deflector
- Multiple sizes available
Filter Bags
SlurryMonster Filter Bags are designed to collect and filter sediment and slurry. Made from high strength industrial fabric to withstand any job.
- Easy to install and use
- U.S. Sieve: 60-70
- Flow Rate: 90 GPM
- Stackable
- High strength industrial fabric
- Side spout entry
- Comes in eight different sizes
This is What i Need
- Price $30.00 - $99.99 Remove This Item