Products

LUCID (reduce pH, flocculate, encapsulate)

The LUCID line of chemicals is a proprietary granular blend designed for recycling wastewater and slurry type solutions while maintaining pH balance. But that's not all. LUCID not only reduces pH, it also neutralizes leachate water, encapsulates metals and particulates, separates solids from water keeping them in suspension, and flocculates slurry in preparation for filtration. 

We’ve color coded our LUCID ™️ line to the litmus strips you use: high, medium and low acid, to low, medium, high alkaline and neutral. This makes it easier to determine what you’re dealing with, and easier to determine the treatment needed just by looking at the packaging.

30 - 1 lb. single-dose packs come in a 5 gallon bucket. Each single pack is perfectly measured to maintain pH balance. Choose from HB, MB, LB, and N. 

pH Treatment Ranges: 

HB (High Base)  11+

MB (Medium Base)  9.5 - 11

LB (Low Base)  8 - 9.5

N (Neutral)  6.5 - 8

 

This is What i Need

Slurry Dehydrator

SlurryMonster Slurry Dehydrator is non-hazardous and super absorbent, used to absorb free water within cement. Use for high pH wastewater. 

This product is used to solidify slurry and ensure the slurry will be accepted by landfills that passes both the Paint Filter Test (PFLT) and the Toxicity Characteristic Leaching Procedure for Heavy Metals (TCLP.)

  • Solidifies slurry immediately
  • Reduces processing time
  • Easy disposal
  • Passes EPA testing for compliant landfill disposal
  • Absorbs 200-300 times its weight
  • Environmentally friendly
This is What i Need

Slurry Dehydrator SF

Dehydrator SF is a silica-free, non-hazardous, super absorbent that's used to solidify slurry and ensure it's ready for proper and compliant disposal. Comes in a convienent and easy to use shaker container, 5 gallon bucket loose powder and 30-16oz. single-dose packs in a 5 gallon bucket for easy distribution. 

This is What i Need

Slurry Separator

SlurryMonster Separator is a granular additive designed for use in the treatment of slurry-based wastewater processes. SlurryMonster Separator creates a large floc, separating solids from the slurry and collecting them on the bottom of a storage apparatus, resulting in clean, reusable, water.

  • Rapid separating solution
  • Protects from environmental fines
  • Compliant disposability to recycle water

 

 

This is What i Need

Tank Cleaner

SlurryMonster Tank Cleaner is a safe, non-toxic cleaning solution designed to separate slurry or slurry solutions. Our proprietary blend Tank Cleaner provides hydrochloric cleaning technology to avoid solid buildup and prepares the tank for advanced dewatering.

When applied to slurry, solids begin separating at a rapid pace, collecting on the bottom, leaving water clear, while remaining loose enough to be emptied out of a tank.

  • Instantly dissolves all hardened slurry and rust from equipment, tooling and sponges
  • EPA 9095B paint filter test compliant
  • Rapid separation
  • Granular form to be used with FilterPack technology

 

This is What i Need

VNYM 2.5 GAL - Case of 2

Introducing VNYM. It’s a safe acid replacement that’s NSF60 certified, with enough power to reduce pH, descale, remove rust, calcium, lime, and treat water. All the while being safe enough to use in potable water.

  • Safe acid replacement
  • pH reduced
  • Descaler
  • NSF60 Certified
  • Safe for potable water
  • Remove calcium, rust, and lime
  • Ready to use solution

Product comes packaged as a Case of 2 - 2.5 gallon units. 

This is What i Need